Omega-holde
Clamp
Secure chain
.7.
R
IGGING THE FIXTURE
I M P O R TA N T : I N S T A L L AT I O N M U S T B E C A R R I E D O U T B Y A Q U A L I F I E D
PROFESSIONAL.
Ø
The equipment must be mounted on equipment the has been designed and constructed in a
way that can withhold 10 times the weight for 1 hour without any structural damage to the
supporting structure.
Ø
The installation must always be secured with a second safety attachment, e.g. safety cable.
This secondary safety attachment must be connected in a way that allows no part of the
equipment to fall to the ground if the main attachment fails.
Ø
When rigging, derigging or servicing the fixture, all persons must clear the area below the
work place.
Ø
The user must have the safety and technical aspects of the installation checked by a qualified
professional before commencing operation.
Ø
The user must have the equipment checked every four years by a qualified expert or in
accordance to local health and safety regulations.
Ø
The user must have the installation checked by a qualified professional at least once a year.
Ø
The equipment must be installed out of reach of people.
Ø
The equipment must never be mounted swinging freely.
Ø
This device can be placed directly on the stage floor or rigged in any orientation on a truss
without altering its operating characteristics.
Mounting using the Omega-Holder:
1)Bolt each clamp to the omega holder with a M12
bolt.
2)Attach the Omega-Holder to the bottom of the
base by inserting both screw bolts into the base
and tightening clockwise.
3)Connect the safety cable through the two holes
in the bottom of the base and to the truss.
