DMX Operation
This light can be controlled using standard DMX512 controllers. In order to
control the light via DMX you must assign the DMX address using the 10 dip
switches at the back of the unit.
To put the unit into DMX Mode, dip switch 10 must be set to the off position.
After doing this, you must then select the desired DMX Address by using dip
switches 1 to 9.
The unit must be turned off while performing this function.
If you are changing DMX address, the unit must be turn off to allow it to
reset.
Dip Switch No.
Digital Address
Dip Switch No.
Digital Address
1 1 6 32
2 2 7 64
3 4 8
128
4 8 9
256
5 16 10
FUNCTION
The following are examples of dip switch settings:-
