NOTICE
Please follow the instructions outlined in this manual. This product must be
repaired by a qualified person.
•
Do not operate this product in wet or dusty conditions.
•
This unit must be installed in a fixed position in order to minimize
vibrations. Make sure your clamp is tightened properly.
•
Ensure that the vent is free and clear from any obstruction.
•
Ensure that plug is connected securely before turning unit on.
•
Do not run unit continuously for longer than
two hours
.
•
If unit is run consistently for two hours, it must be
turned off for 15
minutes in order to cool down.
•
Whenever transporting this product please ensure that original packaging
is used or a proper flight case with padding to protect the unit.
WARNING
This laser light has a danger rating of Class IIIB, it is dangerous to observe the
beam of light directly. The minimum distance for observation is 20CM, and at
that distance you should not look directly at the beam for longer than 10 seconds.
SPECIFICATIONS
Laser Type:
Solid state semiconductor laser .
Wavelength:
Red 650nm, Green 532nm
Power Supply:
110V-220V 50/60Hz Auto Switching 100 watt 1 amp
Laser Output:
2 x Red 100mw, 2 x Green 60mW
DMX Channels:
8
Operating Mode:
DMX512, Sound Active and Master slave
Patterns:
16
