6
Note:
In sound model, device will
close light in 5 seconds automatically,
if there isn’t any sound signal. Light on
until sound signal recived.
Auto
FUNC
UP
DOWN
ENTER
Aut 0 laser+RGBWA+8/W
Aut 1 laser+ RGBWA
Aut 2 laser +8/W
Aut 3 RGBWA+8/W
Aut 4 RGBWA
Aut 5 laser
Aut 6 8/W
UP/DOWN to choose display speed
.
S 1 is fastest
S100 is slowest
S 0 is defualt
Confirm choice, adjust sensitivity by potentiometer
It’s work will follow the procedure in host device
by DMX signal
LED letter strobes means DMX signal or SLAVE signal is
not connected well, please check cable, control panel and
other equipments.
D001 TO
D504
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
UP/DOWM
ENTER
confirm
into speed choice
Sou 0 laser+RGBWA+8/W
Sou 1 laser +RGBWA
Sou 2 laser+8/W
Sou 3 sound RGBWA+8/W
Sou 4 sound RGBWA
Sou 5 sound laser show
Sou 6 sound 8/W
Menu operating instruction
Once after every power on laser, the VERSION and MANUFACTURE INFORMATION will be shown in
LCD monitor of rear panel. When laser is powered on, LCD monitor on rear panel shows the current
operating standalone mode or DMX address of DMX mode. With help of LCD control panel, is very easy to
set and change the operating mode of laser. After every resetting and saved, the new mode information will
be shown on LCD monitor at next power on.
Mode Option, to choose the operating mode of laser.
FUNC
Confirmation, to confirm the laser to show the present mode at the next operation.
ENTER
UP/DOWN, to change operating mode, parameter or DMX address.
UP
DOWN
Ｉ ｎ ｉ ｔ ｉ ａ ｌ ｓ ｅ ｔ ｔ ｉ ｎ ｇ
Sound
SLAVE
DMX
Summary of Contents for MONSOON FX
Page 1: ...M ONSOON F X...
