3
2. MOUNTING AND INSTALLATION
Caution:
For added protection, mount the fixtures in areas outside walking paths, seating areas, or in areas were the
fixture might be reached by unauthorized personnel. Before mounting the fixture to any surface, make sure that the
installation area can hold a mi
nimum point load of 10 times the device’s weight. Fixture installation must always be
secured with a secondary safety attachment, such as an appropriate safety cable. Never stand directly below the
device when mounting, removing, or servicing the fixture.
Whether installing inverted on a truss / ceiling or set on a flat level surface (see illustration below). Be sure this fixture
is kept at least 0.5m (1.5 ft.) away from any flammable materials (decoration etc.). Always use and install the supplied
safety cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails.
Mounting Points:
Overhead mounting requires extensive experience, including calculating working load limits. A
knowledge of the installation material being used and periodic safety inspection of all installation material and the
fixture are all imperative and should only be performed by a qualified technician. Improper installation can result in
bodily injury and damage.
Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate
wall outlet.
Floor Mounting:
Set the 2 brackets at your desired angle and aim your fixture accordingly. Please see diagram below.
