![Microh LED BAR II User Manual Download Page 5](http://html1.mh-extra.com/html/microh/led-bar-ii/led-bar-ii_user-manual_1786496005.webp)
Sound Active Mode
•
From the main menu, select either “SOUA” or “SOUF”.
•
SOUA mode will chase randomly through the internal programs activated by
sound.
•
SOUF mode will chase through seven individual full bar colours.
•
To adjust the audio sensitivity, select “SEnS” from the main menu and press
ENTER. Using UP and DOWN buttons select numbers 0 through 15 (0 being
the lowest and 15 being the highest sensitivity).
Manual Mode
•
From the main menu, select “rLXX”, “gLXX”, and “bLxx” and uses the UP and
DOWN buttons to adjust each individual colour from numbers 0 to 15 (0 being
off and 15 being the full intensity). This will create a custom colour mix of your
choosing.
Colour Fade
•
From the main menu, select “FAXX” and use the UP and DOWN buttons to
select the speed of the colour fade (0 being the slowest and 15 being the
fastest).
Auto Colour Change (7 colour change)
•
From the main menu , select “ASXX” and use the UP and DOWN buttons to
select the speed of the colour change (0 being the slowest and 15 being the
fastest).
Chase Mode
•
From the main menu, select “CEXX” and use the UP and DOWN buttons to
select your desired chase from numbers 1 to 15.
•
To adjust the speed of the chase select “CSXX” from the main menu and use
the UP and DOWN buttons to select speeds 1 to 15 (1 being the slowest and
15 being the fastest).
Strobe Mode (FLASH)
•
To apply strobe (FLASH) to one of the auto modes, select “FLxx” from the main
menu and use the UP and DOWN buttons to select your desired flash rate
from 1 to 15 (1 being the slowest and 15 being the fastest)