background image

7

 

 

8.  KEY FEATURES 

- RGB Colour Mixing DPSS Diodes (R

ed650nm, Green 532nm, Blue450nm)

 

- Pre-Programmed Beam Shows and Animations (Total of 128) 
- Controllable via DMX (3 Pin XLR) 
- IDLA Input for PC Control 
- High Speed Quality 20-25K Scan Motors (Max 20,000 pps) 

Eyebolt for Safety Support, Will Support 10 times Weight of Fixture 

- Air Cooled 
- 700 mW Total Laser Output  (

B300mw)

 

- DMX, ILDA, Sound Active, Auto, Master/Slave Run Modes 
-12 DMX Channels

 

 

9. TECHNICAL SPECIFICATIONS  

 

MODEL:

 FIREFLY RGB 

LASER DIODE:

 DPSS, Red650nm, Green 532nm, Blue450nm

  

SCANNER: 

20-25 Kpps 

SCANNING ANGLE:

 ± 30° 

COOLING SYSTEM:

 Fan 

MAX RUN TIME:

 Approximately 4 Hours 

WARM-UP TIME:

 < 15 Minutes 

WORKING TEMPERATURE: 

10° ~ 35° C 

VOLTAGE:

 120VAC 60Hz 

FUSE:

 120VAC 1A 

DIMENSIONS:

 13.50” x 9.72” x 4.09” / 343 x 247 x 104 mm 

BOX DIMENSIONS:

 17.91” x 12.2” x 8.46” / 455 x 310 x 215 mm 

NET WEIGHT: 

7.75 lbs / 3.52 kg 

GROSS WEIGHT:

 10.5 lbs / 4.76kg 

WARRANTY:

 2 Year Limited Warranty. The Laser diodes are covered under a 6 month replacement warranty. 

 

 

 

Summary of Contents for Firefly RGB











Reviews: