Clamp Mounting:
The MICROH ASTEROID RGB
provides mounting bracket assembly that is to
be used to mount on a truss or the floor. When mounting this fixture to truss, be sure to secure
an appropriately rated clamp to the included bracket fitted through the center hole. As an added
safety measure, be sure to attach at least one properly rated safety cable to the fixture.
Regardless of the rigging option you choose for your MICROH ASTEROID RGB, always be sure
to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety
cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging
point for the safety cable and never secure a safety cable to a carrying handle.
Proper Usage:
This product is for overhead mounting only. For safety purposes, MICROHDJ
recommends mounting lighting effect products on steady elevated platforms or sturdy overhead
supports using suitable hanging clamps. In all cases, use safety cables. Obtain appropriate
mounting hardware from your lighting vendor.
International laser safety regulations require that laser products must be operated in the
fashion illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation
between the floor and the lowest laser light. Additionally, 3 meters of horizontal separation
is required between laser light and audience or other public spaces.
CAUTION! USE OF CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER
THAN THOSE SPECIFIED IN THIS USER MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
4
