GREER COMPANY
GREER COMPANY
GREER COMPANY
GREER COMPANY
Crane Systems
GREER COMPANY
1918 EAST GLENWOOD PLACE, SANTA ANA, CA 92705
PN W450250 Rev B 08/09/00
RCI 510 RATED CAPACITY INDICATOR OPERATOR'S MANUAL
TEL:(714) 259-9702 FAX:(714) 259-7626
24 of 35
OPERATOR SETTABLE ALARMS
OPERATOR SETTABLE ALARMS
OPERATOR SETTABLE ALARMS
OPERATOR SETTABLE ALARMS
ACCESSING THE OPERATOR ALARMS
To access the Operator Alarms from the main
working screen, press the operator alarms push
button (item 24). The Information Screen will
then show the current status of the alarms.
The four operator alarms are shown below
followed by the number identity of the push
button that controls each alarm. These buttons
are called out in the illustration above.
Minimum Boom Angle (item 28)
Maximum Boom Angle (item 29)
Maximum Boom Length (item 25)
Maximum Tip Height (item 27)
Each push button operates as a toggle switch
turning the alarm "ON" or "OFF."
To activate or deactivate an alarm:
•
If the alarm is OFF, press the
appropriate push button to turn the
alarm ON.
•
If the alarm is ON, press the
appropriate push button to turn the
alarm OFF.
Refer to page 25 for a discussion on minimum
and maximum boom angles and page 26 for
maximum boom length and maximum tip height.
Return to the main screen by pressing the
operator alarm push button
(item 24) two
times.
MIN ANGLE OFF
MAX LENGTH OFF MAX HEIGHT OFF
TEST
MAX
SET
MAX ANGLE OFF
6
23,500
i2,300
44.8
62.7
26.4
24
25
27
28
29
