Microframe Corporation
8
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 4500
Setup
1. Plug in display –
ensure only one display plugged in.
2. On mobile device, connect to Wi-Fi network "SoftAPxxxxxx"
3. Open App
4. Tap "Display Settings" button
5. Tap the display with the IP: 192.168.1.3
6. Tap “[Display Setup]”
7. Select network from list
8. Type in network password
9. <Optional> Set Device Name
10. <Recommended> Set App Pin
11. Click [SAVE]
12. Close app and reconnect to your Wi-Fi network
13. Open app and verify display now shows up under "Display
Settings"
[Scan] - retrieve a list of Wi-Fi networks from the display.
[Wi-Fi Networks] - a list of the Wi-Fi networks in range.
[Password] - the password for the network.
[Display Name] - this name is used to identify the display on the "Displays" page.
[Pin] - this must match the pin setting for this display. See the "Displays" page.
[Save] - Press here to apply changes to the display and cause it to connect to the new network.
3.1 Setting up the Display from the App
