Microframe Corporation SERIES 3002, Operating Manual

Page: 10 / 13

Microframe Corporation Series 3002 - DataPage II Transmitter w/Line Port
10
prompt tones. Simply enter the pager number message
and listen for the sign-off tones. If you replace the handset
prior to hearing the sign-off tones, the page will be
aborted. It is possible to send the page without waiting for
the sign-on tones. This may well require the delay before
sending the sign-on tones to be lengthened (see program-
ming section on ‘SET TIME BEFORE SIGN-ON TONES’).
To achieve this facility you must send valid DTMF tones
to be received by the system before the sign-on tones are
generated. It is therefore possible to extend the sign-on
delay past the inactivity timer, which effectively means
that the sign-on tones will never be received.
2.10 SPEED DIALING
It may be possible to effect some speed dial functions
with your telephone system; however, telephone ex-
changes vary as to the way in which they perform
depending upon their own internal protocol. With certain
systems you may have to establish an audio connection
with the port prior to sending the message. With other
systems it may be possible to program pauses between
accessing the port, sending the pager number, and send-
ing the message. If this is possible, it will be necessary to
extend the ‘TIME BEFORE SIGN-ON TONES’ to allow
valid data to be sent before receiving the sign-on tones.
2.11 TONE ONLY PAGING
Numeric and alphanumeric pagers can receive “no-
message” calls by entering * in place of the message.