Microframe Corporation Series 160, Operating Manual, Page: 8 / 12

8
Microframe Corporation Series 160
2.1 DETERMINE CONFIGURATION
The Model 160 Booster Amp will operate
effectively at any point along the cable path
connected to the Keypad. However, to maxi-
mize the number of Displays that the Model 160
Booster will drive, locate it within 200 feet of
the Remote Displays it is driving. This may be
next to the Keypad or at the other end of the
cable connected to the Keypad circuit.
The Booster requires a connection to a 115
volt outlet with the 24vac adapter supplied.
2.2 ROUTING THE CABLES
All cable routing should be as straight as
possible with no severe bends that may cause
kinking.
2 INSTALLATION PROCEDURES
S IG
IN
160\ AX\ 9701.d rw
1 1/2 AMP
FAST BLO
BLACK
RED
INP UT
OUTP UT GND
S IG
O UT
RED
G RO UND
SIG NAL
MO DEL 4600 DISPLAY
REAR VIEW
MO DEL 4060
REAR VIEW
WITH COVER REMOVED
MO DEL 160 BO OSTER
0
1 3
4 5 6
7 8 9
Visua l-Pa g e r Se rie s 4000
To ENTER a paging number, t ype it s digit s (press
DELETE if an er ror is made). Then press ENTER.
A Blinking light indicat es a number is being ent er ed.
To DELETE a paging number, press DELETE when t he
number is being displayed.
2
115 TO 24 VAC
WALL MOUNTED
TRANS FORMER
115 VAC
MO DEL 4600 DISPLAY
BLACK
RED