Operation Manual
Page 2 of 3 http://www.microfire-system.com
Length
149 mm
Weight
220 g (including batteries)
Working temperature
-40
℃
- +60
℃
Water resistance
IP68 (as per U.S. MIL-STD-810G)
Drop
1.5 m (as per U.S. MIL-STD-810G)
Optional accessories
3,400mAh 18650 rechargeable Li-ion battery;
RS7 remote switch tail cap; WM7 Picatinny mount;
A1 cradle/vehicle dual charger;
2A direct wall charger; charger cable; holster;
Components:
1.
2.
3.
4.
Flashlight body Rechargeable battery A1 charger Nylon holster
5.
Spare O-rings
Operation instructions:
1
.
Power on/off:
a)
Press the button on pushing tail cap once to switch on the light,
b)
Press the button again to switch off.
2. Brightness adjustment:
a)
Press the button once, the default mode is 100% full power with a 800 m throw;
b)
Press and hold the button for more than 3 seconds, the beam intensity will drop to 1% of its
initial value, and then it will slowly come back up to its 50% level. Release the button to
lock the brightness level.
3. Strobe activation:
When the light is off, press and then release the button after 3 seconds, strobe will be activated.
4. Beam divergence adjustment:
