Microcyber NCS-TT106H-R1, User Manual

Page: 14 / 23

11
http://www.microcyber-fieldbus.com
HART DIN Rail Temperature Transmitter | NCS TT106H R1 | Page
Email | fang.siqi@microcyber.cn
B_TC B thermocouple
E_TC E thermocouple
J_TC J thermocouple
K_TC K thermocouple
N_TC N thermocouple
R_TC R thermocouple
S_TC S thermocouple
T_TC T thermocouple

Wiring system
：
It can be set to 2-wire system, 3-wire system
and 4-wire system, only effective for RTD.

Cold-end temperature compensation: it can be set to prohibit,
internal measurement and external measurement. When
the cold-end temperature compensation is prohibited, the
transmitter will not carry out the cold-end temperature
compensation;
when the cold-end temperature
compensation is enabled to measure internally, the value
of the cold-end temperature compensation is measured by
the internal temperature measuring chip; when the cold-
end temperature compensation is enabled to measure
externally, the external two-wire system Pt100 is used, and
then the value of the cold-end temperature compensation
is measured by the external Pt100.

Channel status: Display sensor channel status (open circuit,
short circuit & etc.).

Sensor channel value: Display the original value of sensor
channel.

Cold end temperature: Display the current cold end