UCS1003-2 EVALUATION BOARD
USER’S GUIDE
2016 Microchip Technology Inc.
DS50002430A-page 7
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
UCS1003-2 Evaluation Board. Items discussed in this chapter include:
•
•
Conventions Used in this Guide
•
•
•
•
DOCUMENT LAYOUT
This document describes how to use the UCS1003-2 Evaluation Board. The manual
layout is as follows:
•
– Important information about the UCS1003-2
Evaluation Board.
•
Chapter 2. “Installation and Operation”
– Includes instructions on installing and
getting started with the UCS1003-2 Evaluation Board.
•
Chapter 3. “Hardware Overview”
– Shows hardware details of the UCS1003-2
Evaluation Board.
•
Appendix A. “Schematics and Layouts”
– Shows the schematic and layout
diagrams for the UCS1003-2 Evaluation Board.
•
Appendix B. “Bill of Materials (BOM)”
– Lists the parts used to build the
UCS1003-2 Evaluation Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
