Microchip Technology STK600, User Manual

Page: 23 / 35

The connectors to be used on an expansion board is manufactured by FCI and has P/N: 61082-101402LF. See also www.fciconnect.com for more
information.
The connectors must be placed with exactly 119mm between center to center. The expansion board must have a maximum width of 55mm to avoid
collision with components on the mainboard.
The pinout of the expansion connectors is shown in the table below.
Table 4.5. EXPAND connector pinout
EXPAND0 EXPAND1
GND 1 2 VTG GND 1 2 VTG
PA0 3 4 PA1 PJ0 3 4 PJ1
PA2 5 6 PA3 PJ2 5 6 PJ3
PA4 7 8 PA5 PJ4 7 8 PJ5
PA6 9 10 PA7 PJ6 9 10 PJ7
GND 11 12 VTG GND 11 12 VTG
PB0 13 14 PB1 PK0 13 14 PK1
PB2 15 16 PB3 PK2 15 16 PK3
PB4 17 18 PB5 PK4 17 18 PK5
PB6 19 20 PB7 PK6 19 20 PK7
GND 21 22 VTG GND 21 22 VTG
PC0 23 24 PC1 PL0 23 24 PL1
PC2 25 26 PC3 PL2 25 26 PL3
PC4 27 28 PC5 PL4 27 28 PL5
PC6 29 30 PC7 PL6 29 30 PL7
GND 31 32 VTG GND 31 32 VTG
PD0 33 34 PD1 PM0 33 34 PM1
PD2 35 36 PD3 PM2 35 36 PM3
PD4 37 38 PD5 PM4 37 38 PM5
PD6 39 40 PD7 PM6 39 40 PM7
GND 41 42 VTG GND 41 42 VTG
PE0 43 44 PE1 PN0 43 44 PN1
PE2 45 46 PE3 PN2 45 46 PN3
PE4 47 48 PE5 PN4 47 48 PN5
PE6 49 50 PE7 PN6 49 50 PN7
GND 51 52 VTG GND 51 52 VTG
PF0 53 54 PF1 PP0 53 54 PP1
PF2 55 56 PF3 PP2 55 56 PP3
PF4 57 58 PF5 PP4 57 58 PP5
PF6 59 60 PF7 PP6 59 60 PP7
GND 61 62 VTG GND 61 62 VTG
PG0 63 64 PG1 PQ0 63 64 PQ1
PG2 65 66 PG3 PQ2 65 66 PQ3
PG4 67 68 PG5 PQ4 67 68 PQ5
PG6 69 70 PG7 PQ6 69 70 PQ7
Page 23 of 35 STK600 User Guide
2008-06-20 file://C:\Documents and Settings\PAWEL\Ustawienia lokalne\Temp\~hhE369.htm