background image

Command Line Interface

 2019 Microchip Technology Inc.

DS50002938A-page 37

4.5

COMMANDS

The Microchip SA5X provides access to all device features, status, and measurements 
through the C3 command set.
In addition to these standard commands, backwards compatibility with the 
MAC-SA.3Xm line of Rubidium Oscillators is provided through a set of compatibility 
commands (See 

Appendix B.

  “Legacy Command Set (SA.3Xm)”

). Only a subset of 

the device’s functionality is available through the compatibility command interface; it is 
included to ease the design transition from the SA.3X devices to the newer C3 protocol.

4.5.1

Command Index

The following table contains the available C3 commands. Refer to the next section for 
detailed command usage.

TABLE 4-12:

COMMAND DESCRIPTIONS

 

Command

Arguments

Description

Device Identification Commands

app?

0

Returns a short string identifying the firmware application 
type.

device?

0

Returns a short string identifying the device type.

platform?

0

Returns a short string identifying the firmware platform of the 
device.

describe?

0

Returns a readable English description of the device.

swrev?

0

Returns the software revision.

hwrev?

0

Returns the hardware revision.

serial?

0

Returns the serial number of the unit.

help

0

Returns a list of available commands.

Parameter Commands

get

1

Returns the current value of a parameter.

set

2

Sets the value of a parameter.

add

2

Adds to the current value of a parameter.

browse

1-2

Returns information about one or more parameters.

upd

0

Returns a list of all parameter values that changed since the 
last upd.

Alarms Command

ackalm

1

Acknowledges an alarm, preventing it from contributing to the 
ALARM pin state.

Configuration Management Commands

store

0

Stores the current configuration to flash memory.

latch

0

Latches the current frequency and clears the digital tuning 
parameter.

load

0

Loads the most recent configuration from flash memory.

Miscellaneous Commands

extremes?

1

Returns the minimum and maximum measurements for cer-
tain parameters over the life of the unit.

health?

1

Returns health estimates of certain components.

reset

0

Resets the CPU.

Summary of Contents for SA5 Series
































































Reviews: