Microchip Technology RN4870-I/RM128, Manual, Page: 46 / 55

2016-2021 Microchip Technology Inc. DS50002489E-page 43
RN4870/71
The RN4870 module is labeled with its own technical
conformity mark and certification number. The final
product in which this module is being used must have
a label referring to the type of certified module inside:
Due to the limited size of the RN4871, the technical
conformity mark and certification number are not dis-
played on the module. Therefore, the final product in
which this module is being used must have a label
referring to the type of certified module inside:
11.4.2 HELPFUL WEBSITES
Ministry of Internal Affairs and Communications (MIC):
http://www.tele.soumu.go.jp/e/index.htm
Association of Radio Industries and Businesses (ARIB):
http://www.arib.or.jp/english/
11.5 Korea
The RN4870/71 module has received certification of
conformity in accordance with the Radio Waves Act.
Integration of this module into a final product does not
require additional radio certification, provided installa-
tion instructions are followed and no modifications of
the module are allowed.
11.5.1 LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product, which contains the
RN4870/71 module, must follow KC marking require-
ments. The integrator of the module should refer to the
labeling requirements for Korea available on the Korea
Communications Commission (KCC) website.
The RN4870 module is labeled with its own KC mark.
The final product requires the KC mark and certificate
number of the module:
Due to the limited size of the RN4871, the KC mark is
not displayed on the module. Therefore, the final
product requires the KC mark and certificate number of
the module:
11.5.2 HELPFUL WEBSITES
Korea Communications Commission (KCC):
http://www.kcc.go.kr
National Radio Research Agency (RRA):
http://rra.go.kr
11.6 Taiwan
The RN4870/71 module has received compliance
approval in accordance with the Telecommunications
Act. Customers seeking to use the compliance
approval in their product should contact Microchip
Technology sales or distribution partners to obtain a
Letter of Authority.
Integration of this module into a final product does not
require additional radio certification, provided installa-
tion instructions are followed and no modifications of
the module are allowed.
11.6.1 LABELING AND USER
INFORMATION REQUIREMENTS
The RN4870 module is labeled with its own NCC ID
number, and if the NCC ID is not visible when the
module is installed inside another device, then the out-
side of the device must also display a label referring to
the enclosed module. This exterior label can use
wording such as the following:
Due to the limited size of the RN4871, the NCC ID is
not displayed on the module. Therefore, the outside of
the device must also display a label referring to the
enclosed module. This exterior label can use wording
such as the following:
Contains transmitter module with certificate number:
Contains transmitter module with certificate number: