manualshive.com logo in svg

Microchip Technology RN2483 LoRa, User Manual, Page: 9 / 64

Share
Download
Microchip Technology RN2483 LoRa User Manual Download Page 9

Preface

 2015-2018 Microchip Technology Inc.

 

DS40001784G-page 9

DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE

Microchip’s customer notification service helps keep customers current on Microchip 
products. Subscribers will receive e-mail notification whenever there are changes, 
updates, revisions or errata related to a specified product family or development tool of 
interest.
To register, access the Microchip website at www.microchip.com, click on Customer 
Change Notification and follow the registration instructions.
The Development Systems product group categories are:
•

Compilers

 – The latest information on Microchip C compilers, assemblers, linkers 

and other language tools. These include all MPLAB C compilers; all MPLAB 
assemblers (including MPASM™ assembler); all MPLAB linkers (including 
MPLINK™ object linker); and all MPLAB librarians (including MPLIB™ object 
librarian).

•

Emulators

 – The latest information on Microchip in-circuit emulators.This 

includes the MPLAB REAL ICE™ and MPLAB ICE 2000 in-circuit emulators.

•

In-Circuit Debuggers

 – The latest information on the Microchip in-circuit 

debuggers. This includes MPLAB ICD 4 and PICkit™ 4 in-circuit debuggers.

•

MPLAB

®

 IDE

 – The latest information on Microchip MPLAB IDE, the Windows

®

 

Integrated Development Environment for development systems tools. This list is 
focused on the MPLAB IDE, MPLAB IDE Project Manager, MPLAB Editor and 
MPLAB SIM simulator, as well as general editing and debugging features.

•

Programmers

 – The latest information on Microchip programmers. These include 

production programmers such as MPLAB REAL ICE in-circuit emulator, MPLAB 
ICD 4 in-circuit debugger and MPLAB PM3 device programmers. Also included 
are non-production development programmers such as the PICkit 3.

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
Customers should contact their distributor, representative or field application engineer 
(FAE) for support. Local sales offices are also available to help customers. A listing of 
sales offices and locations is included in the back of this document.
Technical support is available through the website at: 

http://www.microchip.com/support

.

Summary of Contents for RN2483 LoRa

































































Reviews:

No comments