MIC24045 Evaluation Board User’s Guide
DS50002619A-page 14
2017 Microchip Technology Inc.
9. Once the installation completes, leave the
Launch the program
box checked to
automatically start the I
2
C Monitor GUI, or deselect this check box to start the
GUI at a later stage.
Click
Finish
to end the installation.
To start the GUI at a later stage, either click on the desktop icon or browse to
Windows Start>All Programs>Microchip>I2C Monitor
.
FIGURE 3-4:
The Installation Complete Window.
3.3
I
2
C MONITOR GRAPHICAL USER INTERFACE UNINSTALL
In order to install a new version of the I
2
C Monitor Graphical User Interface, any
previous version or corrupted version should be removed from the computer.
To uninstall, go to
Windows Start>Control Panel>Uninstall a program>I2CMonitor
. The
I
2
C Monitor GUI will automatically close once the uninstallation process is complete.
FIGURE 3-5:
Uninstalling the I
2
C Monitor Graphical User Interface.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
