GUI Description
2018 Microchip Technology Inc.
DS50002815A-page 20
4.2
THE GRAPHICAL USER INTERFACE
The following sections describe the items in the Graphical User Interface.
4.2.1
Device Menu
The Device drop-down menu allows the user to select the device to be evaluated. If an
evaluation (or added custom) board is used, the profile will automatically change to the
preselected profile.
4.2.2
File Menu
The File menu allows the user to save (Save registers to file) the registers of the
currently selected device to a file that can then be loaded into the GUI by using the
Load registers from file
button. The saved file can also be edited (open it with a text
editor).
FIGURE 4-2:
File Menu.
4.2.3
Settings Menu
From the Settings menu, add a new custom board to be automatically detected and
switch to its profile. To do this, go to
Settings>Device
descriptors and in the Descriptors
window, add the desired “Board” descriptor and select the desired “Device” profile.
FIGURE 4-3:
Custom Board Menu.
4.2.4
I
2
C Monitor Status and Control Bar
The “Status and Control” bar contains the items in
FIGURE 4-4:
I
2
C Monitor Status and Control Bar.
