MCP1633 SEPIC
LED DRIVER
DEMONSTRATION BOARD
USER’S GUIDE
2020 Microchip Technology Inc.
DS50002945A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP1633 SEPIC LED Driver Demonstration Board. Items discussed in this chapter
include:
•
•
Conventions Used in this Guide
•
•
•
•
DOCUMENT LAYOUT
This document describes how to use the MCP1633 SEPIC LED Driver Demonstration
Board as a development tool to emulate and debug firmware on a target board. The
manual layout is as follows:
•
Chapter 1. “Product Overview”
– Important information about the MCP1633
SEPIC LED Driver Demonstration Board.
•
Chapter 2. “Installation and Operation”
– Includes instructions on setting up
the MCP1633 SEPIC LED Driver Demonstration Board.
•
Appendix A. “Schematic and Layouts”
– Shows the schematic and layout
diagrams for the MCP1633 SEPIC LED Driver Demonstration Board.
•
Appendix B. “Bill of Materials (BOM)”
– Lists the parts used to build the
MCP1633 SEPIC LED Driver Demonstration Board.
•
Appendix C. “Typical Performance Data, Curves and Waveforms”
– Shows
the waveforms for the MCP1633 SEPIC LED Driver Demonstration Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(
www.microchip.com
) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics, to open a list of available online help files.
