Installation and Operation
2015 Microchip Technology Inc.
DS50002447A-page 19
2.4
USING THE EVALUATION BOARD WITH THE PIC32 STARTER KIT
(DM320001)
2.4.1
Introduction
The HV583 128-Channel High-Voltage Driver IC Evaluation Board can be operated by
the Microchip PIC32 Starter Kit (DM320001) via the FX10A-120S/12-SV(71)
connector, J2 (see
).
2.4.2
Software Requirements
In order to operate the PIC32 Starter Kit, the MPLAB
®
X IDE software and MPLAB
®
XC32 compiler must be installed in the user’s system. Software and compilers are
available for download on the Microchip web site at:
.
For detailed information regarding the installation and usage of MPLAB
X IDE software,
refer to the
“MPLAB
®
X IDE User’s Guide”
(DS50002027).
2.4.3
Connecting the PIC32 Starter Kit to the HV583
Evaluation Board
Mount the PIC32 Starter Kit (DM320001) onto the J2
connector before powering up the
board. Follow the power-up sequence and apply the voltage settings indicated in
FIGURE 2-4:
FX10A-120S/12-SV(71) Connector, J2.
Note:
Several PIC32 Starter Kits might be compatible with the HV583 Evaluation
Board, but only the DM320001 is supported with code.
FX10A-120S/12-SV(71)
J2 Connector
