HV583 128-Channel High-Voltage Driver IC Evaluation Board User’s Guide
DS50002447A-page 16
2015 Microchip Technology Inc.
FIGURE 2-1:
Board Power-up Sequence.
2.
Apply the voltage settings by following the steps indicated in
.
After following the power-up sequence and applying the voltage settings correctly, the
evaluation board is ready to operate.
The HV583 128-Channel High-Voltage Driver IC Evaluation Board can be driven by a
generic signal pattern generator or by the suggested PIC32 Starter Kit (DM320001).
Section 2.3 “Using the Evaluation Board with a Generic Logic Signal Pattern
Generator”
Section 2.4 “Using the Evaluation Board with the PIC32 Starter
elaborate on the operation and evaluation process in detail.
Board Power-up
Sequence:
1. GND
2. V
DD
3. VDD_PIC
4. Logic signals
to known state
5. V
PP
TABLE 2-1:
VOLTAGE SETTINGS
Step
Terminal Name
Description
1
GND
Ground
2
V
DD
5.0V, logic power supply for HV583
3
VDD_PIC
5.0V, power supply for PIC32 Starter Kit
)
4
V
PP
+15V to +80V, high-voltage power supply for all HV
OUT
n
Note 1:
If the PIC32 Starter Kit is used and not connected to the USB debug cable.
