HV2903 Analog Switch Evaluation Board User’s Guide
DS50002582A-page 19
2017 Microchip Technology Inc.
The HV MUX Controller is now ready to control the HV2903 Evaluation Board.
FIGURE 2-8:
HV MUX Controller(ADM00825) - Front View.
2.6.2
HV2903 Analog Switch Evaluation Board GUI Description
Please see
Figure 2-9
for a screen capture of the GUI. Every item indicated by circled
numbers is explained after the figure. The selection of the check box, binary data in the
DIN entry box and number in Pulses and T
OFF
entry box are just settings, and do not
change the operation of HV2903 and built-in pulsers immediately. By clicking
Set HV
MUX
,
Start
and
Stop
buttons, the control data set by the user in the GUI changes oper-
ation of HV2903 and turn on/off the built-in pulsers in the HV2903 Analog Switch Eval-
uation Board. Please see the explanation for each corresponding item.
Mini-USB
Connector
USB_Fault
(LD5)
PWR_OK
(LD4)
12V/1A
Power
Connector
OFF/ON Switch
J1
J2
DC_IN (LD2)
FPGA_OK (LD1)
PROM JTAG
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
