6
Hello FPGA Kit
Quickstart Guide
7. Click Autosweep, the GUI
automatically sweeps
one of the input signal
frequencies (Sweep)
through a range of values
and sends to the FPGA to
perform filter operation .
Filtered output from FPGA
is displayed on the right .
Running an Image Processing Application
After programming with
Demo2_HF10_CAM_LCD_FF_Vx.x.dat
file, follow these steps:
1. The video captured from
camera is displayed on
LCD with FPGA running
Image Signal processing.
If required, turn the lens to
adjust the focus.
2. Go to FPGA demo tab to
adjust contrast, brightness
and color balance through
sliders The Contrast,
Brightness, and Color
Balance can be adjusted
through the sliders.
3. Click Reset to set the
default values.
