Microchip Technology Curiosity PIC32MZ EF 2.0, User Manual

Page: 6 / 41

Figure 1-3. Power Block Diagram
USB
USB
Target
PKoB
Arduino Header
Barrel Jack
MIC24052
MIC5528
MIC5528
To PKoB4
To MZ EF
To System
3.3v
3.3v
5.0v
5.5v‐14v
OTG
bypass
Test Point
Jumper
5.0v
5.0v
3.3v
Vin
5.0v
1.4 PICKit On-Board 4
The MPLAB
®
PICkit
™
On-Board 4 (PKoB4) is a new generation of In-Circuit Debugger. The MPLAB PKoB4
programs faster than its predecessor, and is designed to use a high-speed 2.0 USB interface and provide a feature
rich debugging experience through one USB cable. The PKoB4 is intended to support programming debugging and a
Data Gateway interface.
The MPLAB PKoB4 In-Circuit Debugger is compatible with any of these platforms:
• Microsoft Windows
®
7 or later
• Linux
®
• macOS
™
The MPLAB PKoB4 In-Circuit Debugger system provides the following advantages:
Features and Capabilities:
• Connects to computer through high-speed USB 2.0 (480 Mbits/s) cable
• Programs devices using MPLAB X IDE or MPLAB IPE
• Supports multiple hardware and software breakpoints, stopwatch, and source
• code file debugging
• Debugs your application in real time
• Sets breakpoints based on internal events
• Monitors internal file registers
• Debugs at full speed
• Configures pin drivers
• Field-upgradeable through an MPLAB X IDE firmware download
• Adds new device support and features by installing the latest version of MPLAB X IDE (available as a free
download at https://www.microchip.com/mplabx/ )
• Indicates debugger status through on-board LEDs
Development Board Functionality and Features
©
2019 Microchip Technology Inc.
DS70005400A-page 6