Microchip Technology Curiosity PIC32MZ EF 2.0, User Manual

Page: 17 / 41

...........continued
Pin Number Name Description Port
9 LCDHSYNC/NCS3 LCD Horizontal Sync RK1
10 IRQ4 (Resistive touch) Interrupt request line for resistive touch controllers RH11
11 LCDVSYNC/nWE LCD Vertical Sync or Write enable (active low) RK2
12 5.0V VCC +5.0V -
13 LCDPCK/nRD LCD pixel Clock or Read Enable (active low) RC3
14 I
2
C SDA Data line for I
2
C interface. Always implemented, bus
type
RA3
15 LCD D0 LCD Data bit 0 RE0
16 I2C SCL Clock line for I
2
C interface. Always implemented,
bus type.
RA2
17 LCD D1 LCD Data bit 1 RE1
18 SPI SCK Clock for serial peripheral interface. Always
implemented, bus type
RPB14
19 LCD D2 LCD Data bit 2 RE2
20 SPI MOSI M aster O ut S lave I n line of serial peripheral
interface.
RPB3
21 LCD D3 LCD Data bit 3 RE3
22 SPI MISO M aster I n S lave O ut line of serial peripheral
interface.
RPB5
23 LCD D4 LCD Data bit 4 RE4
24 SPI SS SPI Slave Select RH2
25 LCD D5 LCD Data bit 5 RE5
26 UART RX Receiver line of target device UART (Not
Implemented on this design)
No Connect
27 LCD D6 LCD Data bit 6 RE6
28 UART TX Transmitter line of target device UART. (from MCU
to GFX card) (Not Implemented on this design)
No Connect
29 LCD D7 LCD Data bit 7 RE7
30 UART RTS UART Ready To Send (from MCU to GFX card) (Not
Implemented on this design)
No Connect
31 LCD D8 LCD Data bit 8 RG0
32 UART CTS UART Clear To Send (from MCU to GFX card) (Not
Implemented on this design)
No Connect
333 LCD D9 LCD Data bit 9 RG1
34 LCD PWM LCD PWM back light control RPB6/OC1
35 LCD D10 LCD Data bit 10 RF1
36 PWM2 Pulse width modulation, RPD15
37 LCD D11 LCD Data bit 11 RF0
Development Board Functionality and Features
©
2019 Microchip Technology Inc.
DS70005400A-page 17