UCS1003-1 Evaluation Board User’s Guide
DS50002510A-page 26
2016 Microchip Technology Inc.
4.1.1
Tips for Using the Evaluation Board GUI
• For many controls on the GUI panel, placing the mouse cursor over a control will
pop up context help that indicates the register address or provides a description.
• After a power up of the evaluation board, the default settings are loaded. Users
can save setting configurations to user-named files which can be reloaded at any
time for quick reconfiguration (see
Section 4.3.4.3 “Configuration Save and
Load”
).
• The GUI cannot be used to demonstrate UCS1003-1 behavior in Stand-Alone
mode since SMBus communication is required.
4.1.2
GUI Abbreviations
4.1.3
Keyboard Shortcuts
Some GUI controls have keyboard shortcuts, as shown in
Table 4-1
.
Abbreviation
Description
BC
Battery charging
CDP
Charging downstream port
DCE
Dedicated charger emulation
DCP
Dedicated charging port
EM
Emulation
EM_EN
Emulation enable
M1
Mode control pin number one
M2
Mode control pin number two
TABLE 4-1:
UCS1003-1 EVALUATION BOARD GUI KEYBOARD SHORTCUTS
GUI Control
Shortcut
Control Description
Run
CTRL + R
Section 4.2.1.1 “Stop and Run Buttons”
Stop
F12
Section 4.2.1.1 “Stop and Run Buttons”
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
