UCS1003-1
EVALUATION BOARD
USER’S GUIDE
2016 Microchip Technology Inc.
DS50002510A-page 25
Chapter 4. Software Description
4.1
OVERVIEW
To get the graphical interface and the evaluation board running, follow these
instructions:
1. Start the UCS81003/UCS1003-1 GUI software: from the Windows Start menu,
select
Programs > Microchip > UCS81003
.
2. Connect the USB mini connector end of the cable to the board and the standard
USB connector of the cable to any available USB port on the PC. If the V
DD
supply is connected to V
S
(the jumper on J4 header is populated on position 2-3),
then connect the V
S
supply. The USB Activity LED should light, indicating that
the MCP2221 USB bridge is connected to the PC.
The UCS81003/UCS1003-1 Evaluation Board interface (
Figure 4-1
), consists of five
tabs (
Main
,
Configuration & General Status
,
Custom Charging
,
Register Set
and
Demo
) and the right-side sections that are always visible (
Panel Controls
,
Pin State
& Attach Status
and
Active Mode Selection
).
FIGURE 4-1:
UCS81003/UCS1003-1 Evaluation Board GUI Initial Window.
Tabs
Fixed panel
with controls
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
