24
/
30
2
）
After the above operation is completed, gently pull out the power supply (do not pull
out too long, the power control cable is still connected to the control panel), as shown in
the figure
：
3
）
Unplug the power control cable on the control panel, remove the power supply, and
remove the power supply
：
8.2.2.Power Supply Installation
1
）
First plug the control cable of the power supply into the corresponding slot on the
control panel, as shown below
：
Summary of Contents for WhatsMiner M21S
Page 5: ...5 30 Incorrect Connection...
