13
/
30
（
2
）
View the dynamically obtained IP, MAC address, and miner position reported by
the machine in WhatsMinerTools software.
Notes
：
（
1
）
If all the lights on the panel of the machine control panel are not lit after
power-on, please check whether the power supply of the 220V power cable
and the 16A power cable are reliable and the connection is correct.
（
2
）
If the indicator on the right side of the panel of the machine control panel is
on, but the network port is not lit, or the green light is not flashing, check
whether the switch is normal, the network cable connection is reliable, and
the quality of the network cable is faulty.
（
3
）
The computer and miner running the WhatsMinerTools software must be on
the same network segment. Otherwise, the software may not receive the
broadcast message from the machine, so that the ip address and mac
address information reported by the machine ipfound button cannot be
queried.
（
4
）
If the computer and the mine machine are on the same network segment, and
Summary of Contents for WhatsMiner M21S
Page 5: ...5 30 Incorrect Connection...
