background image

Microboards Technology                                                                                   Print Factory 

 

4

 

 
Chapter 1   Introduction 

Print Factory is an automated CD-R and DVD-R printing solution. Print Factory combines 
Microboards' patented autoloading system with Hewlett Packard's inkjet printer engine, giving 
the highest output possible. Print Factory has a 50-disc capacity, making the task of printing 
large numbers of discs fast, easy and hands-free.

 

Fully Integrated Automation

 

Microboards combined their patented autoloading system with HP's new inkjet printer engine 
to give users the highest output possible, both in image resolution and print speed. Since 
Print Factory is an autoloading printer, no calibration of robotics or manual feeding of discs is 
required. Print Factory connects by USB or Parallel interface to the computer, and comes 
with label design software. 

 

Flexibility and Speed for Any Application

 

While Print Factory was designed to fill a need in the high-volume arena, it also has the ability 
to print at 4800 x 1200 dpi on both DVD and CD media. With the included design software, 
users can enjoy its benefits whether making a few discs or a few hundred.Print Factory is 
capable of producing up to 200 discs per hour. In addition, Print Factory uses standard HP 
color and black ink cartridges. The cartridges have a very high yield at a competitive cost, 
which allows for printing costs of a few pennies per disc

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Print Factory










































Reviews: