MicroBoards Technology PF-2 PrintFactory, User Manual

Page: 36 / 41

Microboards Technology PF-2 PrintFactory
36
Print Alignment CD
Place an alignment CD into the printer and click on the Print Alignment CD button
Click Print
Once the disc is printed, check where the circle is located on the horizontal and vertical lines. If either
of the numbers are not zero, adjust the top or left amounts by those shown on the vertical or horizontal
guides, respectively, and click Apply.
NOTE : If alignment is required in the future, after using the printer for some time, make sure and click
on the Factory Defaults button, to reset the alignment numbers, before running the Align Disc
procedure.