manualshive.com logo in svg

MicroBoards Technology PF-2 PrintFactory, User Manual

Get complete control over your printing processes with the MicroBoards Technology PF-2 PrintFactory. This advanced device ensures smooth operations and high-quality outputs. Find the comprehensive User Manual for free download at manualshive.com, enabling you to maximize the functionality of this innovative printer. Get started today and unleash your printing potential.

Share
Download
background image

Microboards Technology                                                                                   PF-2 PrintFactory 

 

34

Color Tab 

 

 
Print in Grayscale – This allows you print in grayscale only.  The High Quality setting will print the 
disc using the Color ink cartridge.  The Black Only selection will use the Black ink cartridge only. 
 
Saturation, Brightness and Color Tone allow you to fine tune your print image. 
 
Factory Settings will set the above values back to the factory defaults. 

Utility Tab 

 

Summary of Contents for PF-2 PrintFactory










































Reviews:

No comments

Related manuals for PF-2 PrintFactory

Telex SpinWise User Manual preview
SpinWise
Brand: Telex Pages: 47

Brands by name

Popular brands

Load more brands