DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
28
Specifications:
DVD Recorder Drive:
DVD-+R/RW CD-R/RW Recorder
Power Source:
115V/230V 50-60Hz switchable power supply
Weight: 58
pounds
Dimensions:
7.48”
(W)
x 16.75” (D) x 24.5” (H)
Power supply:
300W
Environment:
Temperature:
40
°
C (104
°
F) / 5
°
C (41
°
F)
Humidity:
20%
-
80%
Supported Formats:
CD
CD-ROM Mode 1, CD-ROM XA Mode 2 (form 1, form 2),
Photo CD, CD-DA (Audio CD), CD-Extra, CD-R, CD-RW
Recording format
DVD
DVD-ROM, DVD-+R, DVD-+RW, DVD-VIDEO
CD 700MB
Recording capacity (nominal)
DVD 4.7GB
CD
CD-R, CD-RW
Applicable media
DVD
DVD-+R (4.7GB For General discs), DVD-+RW, DVD+R DL
Firmware Updates
Occasionally it may be necessary to load updated firmware on to the DSR DVD Standard
Pro Series duplicator. You will be sent a disc containing the firmware program. Please
follow these steps to load the disc.
•
Hold down the YES button and turn on power to the tower.
•
The display will read “Please Wait” and the system will beep once.
•
Release the YES button.
•
The Reader drive will eject and the display will read “Insert Program Disc”.
•
Place the firmware disc into the Reader drive and close the tray.
•
The display will read “Updating” as the new firmware is being loaded.
•
Once the firmware is loaded, the Reader drive will eject the disc.
•
Remove the firmware disc from the Reader and close the tray.
•
The DSR DVD Standard Pro Series tower will now reboot and be ready for use
with the new firmware program running.
Contact Information
For technical questions or support issues, please contact Microboards Technology
technical support at PH: 952-556-1639, FAX: 952-556-1628, by email at
or on the web at
http://www.microboards.com
.
