BluRay Series MICROBOARDS TECHNOLOGY, LLC
11
READER?
(DISC to DISC)
MASTER CLEAR?
(HDD)
>HDD1?
(DISC to HDD)
8. Place the blank disc(s) into all drive(s) and wait for the LED(s) on the front of the
Recorder(s) to go out. The drive designated in the Setup menu as the Reader is
available as a Recorder when burning HDD to Disc
9. Press the YES button. If you have the Auto Run feature set to ON, the duplication will
begin when all drives are loaded with blank media.
10. The drive trays will open on any recorder without blank discs installed. If you do not want
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.
11. The display will now show the progress of the copy job from the HDD to the Recorder(s):
12. After the Copy job is complete, the disc(s) will be ejected from the Recorder(s).
Clearing the Hard Drive (HDD)
The Master Clear option will not appear if there is no information stored on any of the hard drive
partitions.
1. At the COPY START? (HDD1 to DISC) menu, press the NO or
▼
button until the display
shows MASTER SELECT? (HDD1 to DISC).
2. Press the YES button.
3. The display will show:
4. Press the NO or
▼
button until you the screen displays MASTER CLEAR? (HDD):
5. Press the YES button
6. You can now select which hard drive partition to erase. Pressing the NO or
▼
button will
scroll you though the partition selections.
7. Press the YES button if you are sure you want to clear the HDD.
8. The hard drive will now be cleared and you will be asked if you want to register another
master to the HDD.
9. Press YES and the Reader drive will eject and you can insert another master to register
to the HDD.
10. Press NO and to exit this menu without registering data to the hard drive partition.
COPY 22.4GB
BDROM 25%
REGISTER 22.4GB
BDROM 25%
