USER MANUAL
m crob t
RC-1216H
Ba-RC1216H-PA9
Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. PA9
– 2014 Sept 10
47 of 79
Auto tune works the same way as with the RCU. When you press the button a pop up window
will show the “Drive Power” bar. Apply 10-20W continuous carrier and the tune will be done.
The window will indicate the result of the tuning and the new values will be stored. You have
to manually close the window after tuning.
The “Main Power” button controls an output which be used to control a Relay. Be sure it’s 2-
pole relay and that it can handle the large current needed by the ACOM-2000A (16A at 230V).
If you do not have a relay connected you need to use the “Main Power” button anyway,
otherwise the PWR-ON button will not be visible.