USER MANUAL
m crob t
RC-1216H
Ba-RC1216H-PA9
Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. PA9
– 2014 Sept 10
21 of 79
Configuration with WEB-interface
Before you can use your RC-1216H you must configure it. The unit will have the default IP
addresses 192.168.0.236. The net mask is 255.255.255.0. The configuration is easiest done
via the web interface. Be aware of that your PC must be in the same net e.g. having an IP-
number between 192.168.0.2 and 192.168.0.254 and not be the same as the RC-1216H. If
the default IP-address the RC not fit your network please use the PC-program Microbit Setup
Manager to change the IP-addresses via USB.
Select setup page from the links on the left side and edit the parameters. After each setup
pages is finished press Submit to temporary store the new settings. When you do that a new
red Apply changes button appears on the pages. You can now change parameters on other
pages but the new settings will not take effect until you press
Apply changes
. When you do that
the unit will reboot and start up with the new settings.
If you change your mind after clicking
on submit you can click on Restart device on the left to restart the device without changing
any settings.