Microaces W.12, Assembly Manual

Page: 64 / 65

64
Radio Control Recommendations
The control surfaces are moderately effective on the Hansa-Brandenburg W.12
Set your transmitter (Tx) control rates to low or if you have a computerised Tx,
set the expo to 20% for both the rudder and the elevator.
Feel free to adjust these to suit your flying style after the maiden flight!
STAGE 18 FINISHING TOUCHES
Spot On!
Nose Heavy
Add weight to Tail!
Tail Heavy
Add weight to Nose!
Centre of Gravity (CoG)
With all the electronics installed including the battery, the CoG should be around
the apex of the top wing as shown on the diagram below.
-
ing any weight it is advisable to perform a glide test. Add weight accordingly to
obtain a smooth glide.
Glide Test - How to!
Find a suitable test space with a forgiving landing area, e.g. over
long grass or onto soft furnishing. Ensure all control surfaces are
in the neutral position. Gently toss the model straight and level.
Observe the results and add balancing weight if required.