broch15f.doc
6
6
Rts/CTS hardware handshake
Trigger command to start voiced measurement data and receive data over RS232: T
Mode register programming: M930n where n is 0 for Volt DC, 1 for Volt RMS, or 2 for resistance
Mode inquiry: to find mode setting: Q93
Data output: 00 for volt DC, 01 for volt RMS, or 02 for resistance
Range register programming: M940n where n is 0 for the lowest range like 200mVDC or 2k ohm.
Range inquiry: to find range setting: Q94
Data output: 00 for 200mVDC, 01 for 2VDC in volt DC mode.
Sound volume: MBD(n1)(n2)
Continuous mode rate: MAB(n1)(n2) where n1 and n2 forms a hexadecimal number. Multiply two seconds each
counts.
