| 5
MICROMATIC.COM
SUPPORT (888) 864-9400
2
RECEIVING
AND INSPECTING
Upon receiving your new Micro Matic Pro-Line™ Refrigeration E-Series™ equipment, check
the package and the unit for any damages that may have occurred during transportation.
Visually inspect the exterior of the package. If damaged, open and inspect the contents
with the carrier. Any damage should be noted and reported on the delivering carrier’s
receipt.
In the event that the exterior is not damaged, yet upon opening, there is concealed
damage to the equipment notify the carrier immediately. Notification should be made
verbally as well as in written form. Request an inspection by the shipping company of the
damaged equipment. Retain all crating material until inspection has been made. Finally,
contact Micro Matic.
Open the compressor compartment housing and visually inspect package. Be sure lines
are secure and base is intact.
A NOTE FROM OUR QUALITY CONTROL MANAGER
Congratulations on your new purchase. We would like to welcome you to the Micro Matic
family. The unit in front of you is a great piece of equipment that will become one of your
most reliable tools in your daily operations for years to come!
Prior to shipping your unit, our trained service technicians tested your unit for a period of
12 hours. This performance test was recorded and a copy of the results is included with
this service manual. During this test, our highly qualified personnel inspected your ma-
chine for leaks, lose components, and improper noise levels. We also tested the cooling
performance in an effort to give you the best and most reliable unit possible.
