Programs Windows
CE
60
M000174-19
7.7.3 HTTP
A
UTHENTICATION
Only NTLM authentication is supported. If
no
authentication is required, the «
NTLM
»
value (see table
above) must be set to 0 and all «
A
» registry entries also set to 0. If authentication is used, the registry
entry «
NTLM
» must be set to 1. The «
A
» registry entries of the corresponding virtual directories must
also be set to 1 (see chapter
Virtual Directory Settings
).
Note:
Only the local
User Administration
can be used (see chapter
7.9
)! The connection to a domain
controller is not supported.
Access authentication A
The registry entry
A
for each virtual directory describes the type of access authentication permitted.
The following steps are required to access a web page when
A>0
. The valid values for
A
are
described in the chapter
Virtual Directory Settings
.
1. The user must be authenticated for the corresponding virtual directory. Access is refused if
this is not successful.
2. The user is assigned administrator permissions if the user name is contained in the registry
entry [
HKEY_LOCAL_MACHINE\COMM\HTTPD\AdminUsers
].
3. If
A=1
or
A=2
and the user is contained in the registry entry
[
HKEY_LOCAL_MACHINE\COMM\HTTPD\VROOTS\/«directory»\UserList
] access to the
web page permitted.
Note:
All users are granted administration rights if
A=2
and the registry entry
[
HKEY_LOCAL_MACHINE\COMM\HTTPD\AdminUsers
] is empty. It must therefore be
ensured that the registry entry
AdminUsers
is not empty!
4. If one of the above steps fails, access to the web page is not granted.
User List (UserList)
When listing the users for the virtual directories concerned (see
Virtual Directory Settings
) the
following syntax must be observed:
Example
Description
"GladysL;AnnD;-KimYos"
The users «GladysL» and «AnnD» have access permissions
The user «KimYos» does not have access (identified with a leading
minus character)
"*"
All users have access permissions
Note:
Administrators always have access to a virtual directory if A=1. This applies even if the user is not
contained in the
UserList
registry entry.