MICRO-EPSILON turboSPEED DZ140, Operating Instructions Manual

Page: 9 / 34

Page 9
Functional Principle, Technical Data
turboSPEED DZ140
2.4 Technical Data
Model DZ140 (Controller)
Sensors DS05(03) DS05(04) DS05(07) DS05(14) DS05(15) DS1 DS1(04) DS1/T
Measuring principle /
Target (blade material)
eddy current principle / aluminum or titanium
Maximum speed range
(measuring range)
200 ... 400,000 RPM
Operating
temperature
Controller -40 ... +125 °C, -40 ... +257 °F (at a maximum of 15 VDC supply voltage)
1)
Sensor
-40 ... +200 °C,
-40 ... +392 °F
-40 ... +235 °C,
-40 ... +455 °F
-40 ... +235 °C,
-40 ... +455 °F
(short-term
+285 °C, +545 °F)
Sensor cable -40 ... +200 °C, -40 ... +392 °F
Integral sensor cable 0.5 m ±0.15 m 0.75 m ±0.15 m 0.8 m ±0.15 m
Number of blades rotary switch (accessible from the outside) for 1 up to 16 blades
Digital output
1 pulse / blade (switch
Blades
on 1, TTL level, variable pulse duration) or
1 pulse / revolution (switch Blades on 2...16, TTL level with 100 µs pulse duration)
Analog output
Mode 1, 3, 5: 0 ... 5 V (200 ... 200,000 rpm)
Mode 0, 2, 4: 0 ... 5 V (200 ... 400,000 rpm)
mode rotary switch, adjustable, accessible from outside
RAW signal
Analog measurement signal to control distance between sensor and blade by means of an oscilloscope,
see Fig. 20 ;
load resistance > 5 kOhm, load capacity max. 1 nF
Output sensor temperature 0 ... 5 V (-50 ... +300 °C, -58 ... +572 °F)
Power supply 9 V ... 30 VDC / max. 50 mA (short-term up to 36 VDC)
1)
If power supply is higher, the max. acceptable ambient temperature decreases, see Fig. 17 .