manualshive.com logo in svg

MICRO-EPSILON TIM 160, Instruction Manual

Share
Download
MICRO-EPSILON TIM 160 Instruction Manual Download Page 9

Page 9

Safety

thermoIMAGER TIM

1.3 

Notes on CE Identification

The following applies to the thermoIMAGER TIM: 

 - EU directive 2004/108/EC
 - EU directive 2011/65/EC, “RoHS” category 9 

Products which carry the CE mark satisfy the requirements of the quoted EU directives and the European 
standards (EN) listed therein. The EC declaration of conformity is kept available according to EC regulation, 
article 10 by the authorities responsible at

MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
94496 Ortenburg / Germany

The system is designed for use in industry and laboratory and satisfies the requirements of the standards

 - EN 61326-1: 2006
 - EN 61326-2-3: 2006
 - EN 61010-1: 2010

The system satisfies the requirements if they comply with the regulations described in the instruction manual 
for installation and operation.

1.4 

Proper Use

 - The thermoIMAGER TIM is designed for use in industrial and laboratory areas. It is used for measuring the 

surface temperature based on the emitted energy of objects, see Chap. 

10.

 

 - The system may only be operated within the limits specified in the technical data, see Chap. 

2.

.

 - Use the system in such a way that in case of malfunctions or failure personnel or machinery are not endan-

gered.

 - Take additional precautions for safety and damage prevention for safety-related applications.

Summary of Contents for TIM 160

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands