manualshive.com logo in svg

MICRO-EPSILON TIM 160, Instruction Manual

Share
Download
MICRO-EPSILON TIM 160 Instruction Manual Download Page 30

Page 30

Commissioning

thermoIMAGER TIM

6.4 

USB Cable Extensions

The maximum USB cable length is 20 m. For greater distances between TIM and computer or for stand-alone 
solutions you should use the optional TIM NetBox or the USB-Server Industry Isochron, see Chap. 

A 1

, see 

Chap. 

A 7

.

7. 

Commissioning

  Please install at first the software TIM Connect from the delivered CD.

i

  Further information regarding software installation as well as software features you will find in the in-

struction manual supplied on the CD.

  Now you can connect the thermoIMAGER TIM camera into an USB port (USB 2.0) of your PC.

If connecting the thermoIMAGER TIM camera and the computer please plug at first the USB cable into the 
camera and then into the computer.
If disconnecting the thermoIMAGER TIM camera and the computer please remove at first the USB cable from 
the computer and then from the camera.

 

> Damage to or destruction of the camera

After the software has been started, you should see the live image from the camera inside a window on your 
PC screen, see 

Fig. 19

.

+

Fig. 19 Live image of camera

At first start of software you will be asked to install the calibration data of camera. You will find them on the 
supplied CD.
The sharpness of the image can be adjusted by turning the exterior lens ring at the camera.

Summary of Contents for TIM 160

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands