Page 6
Safety
optoNCDT ILR2250
1.3
Notes on CE Marking
The following apply to the optoNCDT ILR 2250:
-
EU Directive 2014/30/EU
-
EU Directive 2011/65/EU
Products which carry the CE mark satisfy the requirements of the EU directives cited and the relevant applicable harmo-
nized European standards (EN). The measuring system is designed for use in industrial and laboratory applications.
The EU Declaration of Conformity is available to the responsible authorities according to EU Directive, Article 10.
1.4
Intended Use
-
The optoNCDT ILR2250 is designed for use in industrial and laboratory applications. It is used for
Distance, displacement and position measurement
Monitoring quality and checking dimensions
-
The system must only be operated within the limits specified in the technical data,
-
The system must be used in such a way that no persons are endangered or machines and other material goods are
damaged in the event of malfunction or total failure of the system.
-
Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5
Proper Environment
-
Protection class:
IP65 (applies only when sensor cable is plugged in)
Lenses are excluded from the protection class. Contamination of the lenses causes impairment or failure of the function.
-
Temperature range:
Operation:
-10 ... +50 °C
Storage:
-20 ... +70 °C
-
Humidity:
5–95% (non-condensing)
-
Ambient pressure: Atmospheric pressure
