MICRO-EPSILON 4350006.71, Operating Instructions Manual

Page: 215 / 254

Page 59
Installation and Assembly
English
capaNCDT 6100
4.3 Sensor Cable
The sensor is connected to the signal conditioning electronics by the sensor cable. The connection is made by
simple plugging.
The connector locks automatically. The tight fit can be checked by pulling the connector housing (cable bushing).
The lock can be released and the connector can be opened by pulling the knurled housing sleeve of the cable
bushing.
Ø9.4
(.37)
Cable length x
17.5 (.69)
13.7 (.54)
8.6 (.34)
Ø6
(.24)
Ø5.4
(.21)
Ø2.1
1
(.08)
37 (1.46)
27 (1.06)
Ø7
(.28)
Sensor cable CCmxC / CCgxC
21(.83)
Ø6
(.24)
Ø5.4
(.21)
8 (.31)
13.1 (.52)
16.9 (.67)
Sensor cable CCmxC/90 and CCgxC/90
Ø2.1
1
(.08)
Cable length x
Ø2.1
1
(.08)
27 (1.06)
37 (1.46)
Ø7
(.28)
Ø9.4
(.37)
Sensor cable CCmxB and CCgxB
25 (.98)
20.5 (.81)
30.5 (1.20
)
Ø7
(.28)
Ø10
(.39)
Sensor cable CCmxB/90 and CCgxB/90
Ø2.1
1
(.08)
Fig. 5 Dimensional drawings sensor cables
Dimensions in mm (inches), not to scale
Features of the sensor cables, see Chap.
2.2.2 .
1) Sensor cable CCgxC/CCgxB/CCgxC/90 und CCgxB/90: Ø3,1 ±0,10