Removing the SIM
Follow the step 1 through step 3 in the inserting the sim section and then continue with the
below mentioned steps.
1. Push the sim out from the slit provided in the sim holder using a flat head screwdriver
and the sim should slide out ¼
2. Next use the index finger to side the sim all the way out. If you are facing any difficulties
in removing the sim please feel free to contact us.
3. After removing the SIM, please secure the base back onto the lid and fasten the screws
back on till snug.
Warning : Please take utmost care that the board does not come in contact with any
metal or liquid during this process. The board may be rendered undeployable and will
void any warranty. If you have any questions please contact Levelcon
Micro-Design, Inc. |
| 972-488-8725 | 10525 Newkirk St. Suite 260
Page 16
