background image

S

ECTION 

2 - S

YSTEM 

D

ESCRIPTION

 

 
The following sections describe the major system features of the IRV-3702 All-In-One Single Board 
Computer. 
 

P

ROCESSOR

 

The IRV-3702 SBC supports the Intel Celeron processor up to 500MHz. The Celeron microprocessor 
includes MMX media enhancement technology, dynamic execution technology, a 32Kbyte 
(16Kbyte/16Kbyte) non-blocking, level-one cache that provides fast access to heavily used data, and 
128Kbyte L2 cache. The on-board jumper selectable clock generator and ZIF CPU socket makes 
upgrading to a higher performance CPU easy.  Some of the distinctive features of the Celeron 
processor include: 

 Enhanced 64-bit data bus 

 Integrated 128Kbyte L2 cache 

 16Kbyte code and 16Kbyte data caches 

 1G-byte Directly Addressable Memory Space 

 Dynamic execution technology 

 MMX multimedia technology 

 On-chip Pipelined Floating Point Processor  

 66 MHz multi-transaction system bus 

 Integrated Memory Manager 

 Branch prediction feature 

 

S

YSTEM 

M

EMORY 

(SDRAM) 

The IRV-3702 SBC can support up to 1G-bytes of synchronous dynamic random access memory 
(SDRAM) organized as four banks of 32Mx72 including eight parity bits.  The memory is configured 
using four dual in-line memory module sockets, which will accept 168-pin dual in-line memory 
modules (DIMMs) organized as 256MB (maximum) with a maximum access time of 10ns. 
 

DMA C

ONTROLLER

 

The IRV-3702 SBC memory refresh and DMA functions are included in the System Controller chip that 
includes the equivalence of two 82C37 DMA controllers. The two DMA controllers are cascaded to 
provide four DMA channels for transfers to 8-bit peripherals (DMA1) and three channels for transfers 
to 16-bit peripherals (DMA2).  DMA2 Channel 0 provides the cascade interconnection for the two 
DMA devices thereby maintaining IBM PC/AT compatibility. The DMA channel assignments are 
listed below: 
 
  DMA Channel 0:  Not Used (8-bit) 
  DMA Channel 1:  Alternate for Multi-mode Parallel Port (8-bit) 
  DMA Channel 2:  Floppy Disk (8-bit) 
  DMA Channel 3:  Multi-mode Parallel Port (8-bit) 
  DMA Channel 5:  Not Used (16-bit) 
  DMA Channel 6:  Not Used (16-bit) 
  DMA Channel 7:  Not Used (16-bit) 
 
The DMA request (DRQx) and acknowledge (DACKx/) lines are available on the P1 98-pin edge 
connector. 
 
 
 

Summary of Contents for IRV-3702



























Reviews: